• macaura
  • mac-aura-2
0



Mac Aura

The MAC Aura is an award-winning wash light that lighting designers have turned to the world over due to its versatility as a powerful beam and wash luminaire of the highest caliber. The result of out-of-the-box creative thinking, it is the first LED moving head wash light to combine multicolor beam LEDs with a backlight LED array that takes the synthetic look out of LED wash lights.

FEATURES

  • Single-lens wash with fully premixed color
  • Broad color palette, RGBW color mixing
  • Eye-candy Aura Effects™
  • Uniform shades
  • Built-in FX engine
  • 11 to 58° zoom
  • 3850 Lumens output
  • Rapid movement
  • Compact, low weight design (5.6 kg)
  • High efficiency, low power consumption, long lifetime

$5,000.00

Quantity
Category:

Physical

  • Length: 302 mm (11.9 in.) across yoke
  • Width: 302 mm (11.9 in.) across yoke
  • Height: 360 mm (14.2 in.), head straight up
  • Weight: 5.6 kg (12.4 lbs.) without accessories

Dynamic Effects

  • Beam color mixing: RGBW
  • Aura (secondary lens array illumination) color mixing: RGB
  • Beam color temperature control: CTO, variable 10,000-2500K
  • Beam and aura electronic ‘color wheel’ effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
  • Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
  • Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined
  • Electronic dimming: Independent beam and aura, four dimming curve options
  • Pan: 540°Tilt: 232°Pan and tilt speed: Adjustable via onboard control panel and DMX

Control and Programming

  • Control options: Independent control of beam (primary output) and aura (secondary lens array illumination)
  • Macro programs selectable via DMX: Synchronized beam and aura effects
  • Control: DMXRDM: Implemented
  • Control resolution: 8-bit, with 16-bit control of pan & tilt
  • DMX channels: 14/25Setting and addressing: Control panel with backlit graphic display
  • DMX compliance: USITT DMX512-ARDM compliance: ANSI/ESTA E1.20Transceiver: RS-485Fixture software update: Via DMX with Martin™ USB Duo DMX Interface Box

Optics

  • Zoom range: 11° – 58°One-tenth peak angle
  • Light source: 19x 10W RGBW LED Array System
  • LED refresh rate: Beam 1220 Hz, Aura 4395 Hz
  • Minimum LED lifetime: 50 000 hours (to >70% luminous output)
  • **Figure obtained under manufacturer´s test conditions

Photometric Data

  • Total output: 3850 lumens (zoom at maximum)

Construction

  • Color: Black
  • Housing: High-impact flame-retardant thermoplastic
  • Protection rating: IP20

Installation

  • Mounting points: One M12 threaded hole for rigging clamp
  • Location: Indoor use only, must be fastened to surface or structure
  • Orientation: Any
  • Minimum distance to combustible materials: 100 mm (4.0 in.)
  • Minimum distance to illuminated surfaces: 200 mm (7.9 in.)

Connections

  • AC power input: Neutrik
  • PowerConAC power throughput: Neutrik
  • PowerConDMX and RDM data in/out: 5-pin locking XLR

Electrical

  • AC power: 100-240 V nominal, 50/60 Hz
  • Maximum total power consumption: 260 W
  • Power supply unit: Auto-ranging electronic switch mode
  • Main fuse: 5 AT (slow blow)
  • Typical power consumption, all effects static, zero light output:<15 W

Typical Power and Current

  • 100 V, 60 Hz: 236 W, 2.4 A, PF 0.994120 V, 60 Hz: 234 W, 2.0 A, PF 0.992208 V, 60 Hz: 229 W, 1.2 A, PF 0.970230 V, 50 Hz: 228 W, 1.1 A, PF 0.959240 V, 50 Hz: 228 W, 1.0 A, PF 0.953
  • Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal

  • Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
  • Maximum ambient temperature (Ta max.): 40° C (104° F)
  • Minimum ambient temperature (Ta min.): 5° C (41° F)
  • Total heat dissipation (calculated, +/- 10%): 880 BTU/hr.

Approvals

  • EU safety: EN 60598-2-17 (EN 60598-1), EN 62471EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547US safety: UL 1573US EMC: FCC Part 15 Class A
  • Canadian safety: CSA E598-2-17 (CSA E60598-1)
  • Canadian EMC: ICES-003 Class A
  • Australia/NZ: C-TICK N4241